Portainer Templates logo

Portainer Templates

Transmission OpenVPN Latest Transmission OpenVPN Latest

Container

OtherVPNTools

This container contains OpenVPN and Transmission with a configuration where Transmission is running only when OpenVPN has an active tunnel. It bundles configuration files for many popular VPN providers to make the setup easier.

Image details

Pulls: 394.4M
Architecture: amd64, arm64, arm/v7
Image size: 116 MB
Latest: 5.5
User: haugene
Created: Nov 11, 2014
Updated: 4 days ago
Status: active

Source details

Repo: haugene/docker-transmission-openvpn
Stars: 5k
Forks: 1k
Language: Shell
License: GPL-3.0
Latest: v5.5.1 · 8 days ago
Updated: 4 days ago

Configuration

Type
Container
Platform
linux
Image
haugene/transmission-openvpn:latest
Privileged
Yes
Ports
9091:9091/tcp
Volumes
/config : /portainer/Files/AppData/Config/transmission-openvpn/data : /portainer/Downloads/etc/localtime : /etc/localtime
Env vars
PUID=1000PGID=1000OPENVPN_PROVIDER=MULLVADOPENVPN_CONFIG=OPENVPN_USERNAME=OPENVPN_PASSWORD=LOCAL_NETWORK=192.168.0.0/24TRANSMISSION_WATCH_DIR_ENABLED=true
Restart
unless-stopped

Template by novaspirit

Notes

Template created by Pi-Hosted Series
Check our Github page: https://github.com/pi-hosted/pi-hosted

Official Webpage: https://transmissionbt.com/
Official Docker Documentation: https://haugene.github.io/docker-transmission-openvpn/run-container/


List of supported providers available here.

Standalone Install

Select an install method, to see config/commands for deploying Transmission OpenVPN Latest

Installation method

Install on Portainer

Import all app templates into your Portainer instance, for easy 1-click deploys

  1. Ensure both Docker and Portainer are installed, and up-to-date
  2. Log into your Portainer web UI
  3. Under Settings → App Templates, paste the below URL
  4. Head to Home → App Templates, and the list of apps will show up
  5. Select Transmission OpenVPN Latest, fill in any config options, and hit Deploy

Template Import URL

https://raw.githubusercontent.com/Lissy93/portainer-templates/main/templates.json
Show Me demo

More install options in our documentation, or see haugene/docker-transmission-openvpn for app-specific guidance.

OpenVPN and Transmission with WebUI

Docker Build Docker Pulls
This container contains OpenVPN and Transmission with a configuration where Transmission is running only when OpenVPN has an active tunnel. It has built-in support for many popular VPN providers to make the setup easier.

Read this first

The documentation for this image is hosted on GitHub pages:
https://haugene.github.io/docker-transmission-openvpn/
If you can't find what you're looking for there, please have a look in the discussions as we're trying to use that for general questions.
If you have found what you believe to be an issue or bug, create an issue and provide enough details for us to have a chance to reproduce it or understand what's going on. NB: Be sure to search for similar issues (open and closed) before opening a new one.

Quick Start

These examples show valid setups using PIA as the provider for both docker run and docker-compose. Note that you should read some documentation at some point, but this is a good place to start.

Docker run

$ docker run --cap-add=NET_ADMIN -d \
              -v /your/storage/path/:/data \
              -v /your/config/path/:/config \
              -e OPENVPN_PROVIDER=PIA \
              -e OPENVPN_CONFIG=france \
              -e OPENVPN_USERNAME=user \
              -e OPENVPN_PASSWORD=pass \
              -e LOCAL_NETWORK=192.168.0.0/16 \
              --log-driver json-file \
              --log-opt max-size=10m \
              -p 9091:9091 \
              haugene/transmission-openvpn

Podman run

Beware: container is run as privileged, meaning it has full access to host OS.
$ podman run --privileged -d \
              -v /your/storage/path/:/data \
              -v /your/config/path/:/config \
              -e OPENVPN_PROVIDER=PIA \
              -e OPENVPN_CONFIG=france \
              -e OPENVPN_USERNAME=user \
              -e OPENVPN_PASSWORD=pass \
              -e LOCAL_NETWORK=192.168.0.0/16 \
              --log-driver k8s-file \
              --log-opt max-size=10m \
              -p 9091:9091 \
              haugene/transmission-openvpn

Docker version 3.x Compose

version: '3.3'
services:
    transmission-openvpn:
        cap_add:
            - NET_ADMIN
        volumes:
            - '/your/storage/path/:/data'
            - '/your/config/path/:/config'
        environment:
            - OPENVPN_PROVIDER=PIA
            - OPENVPN_CONFIG=france
            - OPENVPN_USERNAME=user
            - OPENVPN_PASSWORD=pass
            - LOCAL_NETWORK=192.168.0.0/16
        logging:
            driver: json-file
            options:
                max-size: 10m
        ports:
            - '9091:9091'
        image: haugene/transmission-openvpn

Docker version 2.x Compose

version: "2.0"
services:
    transmission-openvpn:
        container_name: transmission
        cap_add:
            - NET_ADMIN
        volumes:
            - '/your/storage/path/:/data'
            - '/your/config/path/:/config'
        environment:
            - OPENVPN_PROVIDER=PIA
            - OPENVPN_CONFIG=france
            - OPENVPN_USERNAME=user
            - OPENVPN_PASSWORD=pass
            - LOCAL_NETWORK=192.168.0.0/16
        logging:
            driver: "json-file"
            options:
                max-size: 10m
        ports:
            - 9091:9091
        image: haugene/transmission-openvpn

Known issues

If you've been running a stable setup that has recently started to fail, please check your logs. Are you seeing curl: (6) getaddrinfo() thread failed to start or WARNING: initial DNS resolution test failed? Then have a look at #2410 and this comment in particular. There is a fix and a workaround available.

Image versioning

We aim to create periodic fixed releases with a semver versioning scheme. The latest of the tagged fixed releases will also have the latest tag.
A semver release will be tagged with major, major.minor and major.minor.patch versions so that you can lock the version at either level.
We also have a tag called edge which will always be the latest commit on master, and dev which is the last commit on the dev branch. From time to time we can also have various beta branches and tags, but using either dev or beta tags is probably not for the average user and you should expect there to be occasional breakage or even the deletion of the tags upstream.

Please help out (about:maintenance)

This image was created for my own use, but sharing is caring, so it had to be open source. It has now gotten quite popular, and that's great! But keeping it up to date, providing support, fixes and new features take time. If you feel that you're getting a good tool and want to support it, there are a couple of options:
A small montly amount through Donate with Patreon or a one time donation with Donate with PayPal
All donations are greatly appreciated! Another great way to contribute is of course through code. A big thanks to everyone who has contributed so far!

Serve Transmission OpenVPN Latest on your own domain behind Caddy, Nginx or Traefik. Fill in your domain and copy the result. It's a starting point, some apps need their own base URL or extra headers set too.

Proxying transmission-openvpn-latest.example.com to http://transmission-openvpn-latest:9091

Add this to your Caddyfile

transmission-openvpn-latest.example.com {
	reverse_proxy http://transmission-openvpn-latest:9091
}

Check the logs first

Nine times out of ten the logs tell you exactly what went wrong.

  • In Portainer, go to Containers, click the container, then Logs. Or run docker logs transmission-openvpn-latest
  • Exit codes help too: 137 means killed, usually out of memory. 126 or 127 means the command inside the image is broken.

Port already in use

If deployment fails with "Bind for 0.0.0.0:9091 failed: port is already allocated", something else on your server is using that port.

  • Find what's using it: sudo ss -tlnp | grep :9091
  • Stop the other service, or pick a different host port. In 9091:9091 only the left number is yours to change, the right one belongs to the app.

Running but the page won't load

The container is up but nothing appears in your browser.

  • Use your server's real IP: http://your-server-ip:9091. The 0.0.0.0 link Portainer shows isn't a real address.
  • Give it a minute after first deploy, transmission-openvpn-latest can take a while to initialise.
  • Make sure your firewall allows the port, e.g. sudo ufw allow 9091

Permission denied on volumes

If the logs show "permission denied", the app can't write to its data folder on the host.

  • Fix the ownership: sudo chown -R 1000:1000 /portainer/Files/AppData/Config/transmission-openvpn (and the same for the other mapped folders)
  • Or set the PUID and PGID variables (defaults 1000:1000) to match your own user, found with id $USER

Image won't pull

Test the pull directly on the host: docker pull haugene/transmission-openvpn:latest

  • "manifest unknown" means the tag no longer exists. This template uses latest, so try pinning a specific version instead.
  • "toomanyrequests" is the Docker Hub rate limit. Log in with docker login to raise it.
  • "no space left on device" means a full disk. Reclaim space with docker system prune

"exec format error"

This means the image was built for a different CPU architecture than your server.

  • This image supports: amd64, arm64, arm/v7
  • Check yours with uname -m: x86_64 is amd64, aarch64 is arm64. Raspberry Pi and other ARM boards are the usual culprits.

Container keeps restarting

The unless-stopped restart policy relaunches the app after every crash, so the real error can scroll past.

  • Check the logs right after a restart, the last few lines before it died are the useful ones.
  • Get the exit code with docker inspect transmission-openvpn-latest --format '{{.State.ExitCode}}'
  • Still stuck? Redeploy once with the restart policy set to no so the failure stays visible.

Required settings are blank

OPENVPN_CONFIG, OPENVPN_USERNAME, OPENVPN_PASSWORD have no default value, and transmission-openvpn-latest may crash or misbehave if left empty.

  • Fill them in on the deploy screen before hitting deploy.

Privileged mode

This template runs the container in privileged mode, giving it full access to your host.

  • Only deploy it if you trust the app.
  • If deployment is blocked, your Portainer security settings or hardened host may not allow privileged containers.

Raise an issue

Found something which isn't working as it should? Here's how to report it.

A single container

Transmission OpenVPN Latest runs as one container, the simplest kind of app here. Just the one image to pull and nothing else wired up alongside it.

The app image

An image is the app packed up ready to go, everything Transmission OpenVPN Latest needs bundled into one download. This template pulls haugene/transmission-openvpn:latest, which Docker fetches once (about 116 MB) and then starts your own copy from.

Where the image comes from

Docker pulls its images from registries, public libraries of ready-built apps. Transmission OpenVPN Latest's comes from Docker Hub, published by haugene.

Version tags

The bit after the colon in the image name is the version tag. Here it's latest, which always points at the newest build, so a redeploy can bump you to a newer release without you asking. Newest right now is 5.5. Pin a specific tag if you would rather stay on one version.

Which machines it runs on

Every image is built for particular CPU types. This one ships for amd64, arm64, arm/v7, so it runs on both regular x86 servers and ARM boards like a Raspberry Pi.

Ports

A port is the door the app answers on. A mapping like 9091:9091 means it's reachable on port 9091 of your server, where the left number is yours to change and the right one belongs to the app. It opens:

  • 9091:9091

Volumes

A volume is where Transmission OpenVPN Latest keeps its files so they survive an update or a restart. Without one, anything it saves would sit inside the container and vanish the moment it's recreated. This template mounts:

  • /config from /portainer/Files/AppData/Config/transmission-openvpn on the host
  • /data from /portainer/Downloads on the host
  • /etc/localtime from /etc/localtime on the host

Environment variables

Environment variables are the settings you hand over when you deploy, things like a password or a timezone. Transmission OpenVPN Latest takes 8 of them, and 3 need a value before it'll start properly:

  • PUID, defaults to 1000
  • PGID, defaults to 1000
  • OPENVPN_PROVIDER, defaults to MULLVAD. Https://haugene.github.io/docker-transmission-openvpn/supported-providers/
  • OPENVPN_CONFIG, needs a value. Optional. Mostly used to narrow down what location to use by the provider
  • OPENVPN_USERNAME, needs a value
  • OPENVPN_PASSWORD, needs a value
  • LOCAL_NETWORK, defaults to 192.168.0.0/24
  • TRANSMISSION_WATCH_DIR_ENABLED, defaults to true. Watch-dir-enabled

Restart policy

The restart policy here is unless-stopped, so Docker restarts Transmission OpenVPN Latest after a crash or reboot, but leaves it off when you stop it on purpose. You can change this on the deploy screen. The choices are no (never restart), on-failure (only after a crash), unless-stopped (restart unless you stop it), and always (bring it back no matter what).

Users and permissions

The PUID and PGID settings tell it which user and group to act as on your host. Point them at your own account (find yours with id $USER) so the files it writes into your mounted folders come out owned by you rather than root.

Networking

Nothing custom is set, so Transmission OpenVPN Latest sits on Docker's default bridge network: its own private space that reaches the outside world only through the ports it publishes.

Container name

Once it's deployed, Portainer names the container transmission-openvpn-latest. That's what you'll spot in the containers list and use in commands like docker logs transmission-openvpn-latest.

Privileged mode

This template runs Transmission OpenVPN Latest in privileged mode, which gives it nearly as much access to your server as the system itself. Some apps genuinely need it to reach hardware or manage the host, so it's one to run only if you trust the source.

Platform

The platform is linux, the kind of system the container is built to run on. Docker and Portainer handle this on a normal Linux server.

Open source license

Transmission OpenVPN Latest is open source, released under the GPL-3.0 license. In plain terms the code is out in the open, so you're free to run it and change it to fit what you need.

Portainer app templates

Zooming out, this whole page comes from a Portainer app template: a short recipe telling Portainer how to set Transmission OpenVPN Latest up. Add the template list to Portainer once, then deploying Transmission OpenVPN Latest is a click rather than a wall of config.